LED Tail Brake Lights Turn Signal Integrated Compatible With DUCATI HYPERMOTARD 821 939 950 SP 2012-2021 (Clear)

Fitment:HYPERMOTARD 821 / 821SP (2012-2023)HYPERMOTARD 939 / 939SP (2012-2023)HYPERMOTARD 950 / 950SP (2012-2023)*Before placing your order, please confirm that this product is fully compatible with your specific motorcycle make, model, and year.Product SpecificationsMaterial: Acrylic Clear Lens / ABS Black CoverFunction: Integrated Tail Light, Brake Light, Left/Right Turn SignalsInstallation: Direct replacement; refer to listing photos for installation guidanceWiring Diagram applicable to most bikes:Black Wire(Negative),Green Wire(Brake)Red Wire(Running Light)1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike.2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike.3. Repeat the same process for the other side.To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel. Push down the metal pin as it will make a small cut on each wire bridging the connectors.if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire.⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE):Do not install directly. Please test the wires with an external battery before installation to confirm the function of each wire.Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding.This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

• ⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE): *Do not install directly. Please test the wires with an external battery before installation to confirm the function of each wire. * This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.
• Compatible with HYPERMOTARD 821/821SP 2012–2023,939/939SP 2012–2023,950 950SP 2012-2023.Easy Installation & Perfect CompatibilityNo installation instructions included; you can install easily by referring to the listing photos. *Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding.
• Package Contents & Installation NotesPackage includes 1 × LED tail light with turn signals. (Installation instructions not included; please refer to product images for installation) Please follow the wiring diagram when using red quick connectors to ensure safe and firm connection.
• Integrated LED Tail Light AssemblyBrand new integrated LED taillight with acrylic clear lens and ABS black housing. Combines running light, brake light, and turn signals in one unit to meet multi‑scenario warning needs.
• Flexible Wiring & Resistor CompatibilityEquipped with two yellow wires for turn signal connection. If the turn signals flash too fast or malfunction, an LED resistor is required (not included). Standard wiring: Black=negative, Green=brake, Red=running light.
• Easy to install.（Not include installation instructions）If you have any problem about installation, please contact with us. We will try our best to help you solving the problem